Hydraulic lifting jacks (other jacks)

1. Single-piston jacks EH 350 and EH 200

These lifting jacks can be used in combination with different add-on parts for various tasks:

1. By using the claw (order no. 04-0041-P) long strokes are possible from low lifting points.
2. When fitted with the pressure piece (supplied as standard accessory) it is used whenever long strokes are required from high lifting points.
3. When used with the head piece (06-2352), rounded head piece (06-2353) and also rocker bearing support (06-3351) the jack 04-0041 forms an important part of the uprighting device.

2. Tilting jack

The tilting jack is used for lifting two-axle vehicles and putting them back on the track.
During this operation the tilting jack performs the lifting and lateral displacement movements simultaneously while the associated hooked wheel stop prevents the wheel coming off the rail.

3. Internal lifting jack EH 100

This single piston jack is intended for use with interior lifting points in trams and subway carriages.
The internal lifting jack has an unlockable non-return valve with a pressure safety device at each end. The downward travelling piston is equipped with a rocker support which can compensate for inclined positions of the jack. The form of the jack can be adapted to different lifting devices or to adapter types, threaded connections and attachment functions. The bayonet adapter can be positioned as desired, such as centrally or at the top.

Sonstige Heber